
What are switch films?
Switch films are placed between the top and bottom switch housings to reduce wobble. Some switches are already very tight and will not need films, or will need very thin films. The sound profile can also change slightly, but in my opinion, is a very small factor not really worth worrying about.
How are these different?
This design should be easier to use and apply than the other films on the market. It stays in place a bit better, doesn't jump around and has large tabs on the side to give you some surface area to grab onto, whether you're using your fingers or tweezers.
The films come on a sticky backing sheet (the films themselves are not sticky) which helps keep things organised.
Specs:0.18mm thickness
126 films per pack
Vinyl material
Designed and manufactured in Australia by laser_ninja
Usage tips:
Peel off the outside sheet to access the films easier.
Tweezers are recommended for removing the films and applying to the switch.
The large 'wings' on the side of each film are perfect for grabbing with your fingers or tweezers.
Note:
Discontinuing Switch Films
Unfortunately I will be discontinuing switch films so the remaining stock at vendors is all that's left.
Switch films were labour intensive to produce and needed to be manually checked, pre-peeled and then hand cut into individual sheets to maintain a high level of quality and consistency. I believe they are the best switch films on the market but there's plenty of options nowadays.
Thanks for your support!